RM25.00
PERMATEX 262 PRM ST TL RED 6ML TBCG(#19962)
Assembly with air tools, cylinder block bolts, ring gear bolts, and transmission shaft bolts.
DIRECTIONS:
1. Clean and dry parts using Permatex® Surface PrepTM activator.
2. Shake tube of Threadlocker well before each use.
3. Remove cap and snip nozzle tip.
4. Apply Threadlocker to threaded areas and assemble parts.Refer to Technical Data Sheet for complete information.
*NOTE: Threadlocker works on metal parts. It is not recommended for plastics.
Cured Threadlocker must be heated to 500°F (260°C) before parts will separate.
59 in stock
Permatex Permanent-Strength Red Threadlocker can be applied to fasteners 3/8″ to 1″ (10mm to 25mm) in size before assembly. Permatex’s Red Threadlocker is designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts.
FEATURES
1)Permanent, high strength product that is applied to fasteners 3/8″ to 1″ (10mm to 25mm)
2)Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions
3)Localized heating and hand tools are required to separate parts
4)Protects threads from rust and corrosion
5)OEM specified
WARNING DESCRIPTION
California Proposition 65: WARNING Cancer.
ADVERTENCIA C@ncer. AVERTISSEMENT Cancer.
www.P65Warnings.ca.gov
Size | 6 ML |
---|